Встраиваемые датчики потока с внутренним диаметром 2-25 мм

Датчики этой серии используются в экспериментах, где высока вероятность изменения условий. Диапазон измерений от <1 до 100 л / мин. Область применения – от перфузии изолированных органов до моделей кровообращения, где требуется максимальная чувствительность. Каждый датчик поставляется с кабелем 1,85 м и 16-пиновым металлическим разъемом CC16 или CP16.

Артикул

PXN Series

Технические характеристики

ME1PXN

Precision XN Inline Flowsensor, 1.2 mm (3/64") ID. The ME1PXN Precision Inline Flowsensor has 1.2 mm (3/64") ID is fabricated around flexible Pebax tubing which may be cut to length for insertion into small tubing circuits or perfusion setups. It can be calibrated for up to four fluid, temperature, flow rate combinations. Supplied with a 1.85 m cable, CC16 or CP16 16-pin connector. Please consult your nearest ADInstruments Office or representative for the most suitable probe for your application.

ME2PXN

Precision XN Inline Flowsensor, 1.8 mm (1/16") ID. The ME2PXN Precision Inline Flowsensor has 1.8 mm (1/16") ID is fabricated around flexible Pebax tubing which may be cut to length for insertion into small tubing circuits or perfusion setups. It can be calibrated for up to four fluid, temperature, flow rate combinations. Supplied with a 1.85 m cable, CC16 or CP16 16-pin connector. Please consult your nearest ADInstruments Office or representative for the most suitable probe for your application.

ME3PXN

Precision XN Inline Flowsensor, 2.4 mm (3/32") ID. The ME3PXN Precision Inline Flowsensor has 2.4 mm (3/32") ID is fabricated around flexible Pebax tubing which may be cut to length for insertion into small tubing circuits or perfusion setups. It can be calibrated for up to four fluid, temperature, flow rate combinations. Supplied with a 1.85 m cable, CC16 or CP16 16-pin connector. Please consult your nearest ADInstruments Office or representative for the most suitable probe for your application.

ME4PXN

Precision XN Inline Flowsensor, 3.2 mm (1/8") ID. The ME4PXN Precision Inline Flowsensor, 3.2 mm (1/8") ID, has barbed (4.0 mm (0.16"), OD) rigid Ultem tubing ends which mate easily with flexible laboratory tubing. It can be calibrated for up to four fluid, temperature, flow rate combinations. Supplied with a 1.85 m cable, CC16 or CP16 16-pin connector. Please consult your nearest ADInstruments Office or representative for the most suitable probe for your application.

ME5PXN

Precision XN Inline Flowsensor, 4.8 mm (3/16") ID. The ME5PXN Precision Inline Flowsensor, 4.8 mm (3/16") ID, has barbed (5.8 mm (0.23"), OD) rigid Ultem tubing ends which mate easily with flexible laboratory tubing. It can be calibrated for up to four fluid, temperature, flow rate combinations. Supplied with a 1.85 m cable, CC16 or CP16 16-pin connector. Please consult your nearest ADInstruments Office or representative for the most suitable probe for your application.

ME6PXN

Precision XN Inline Flowsensor, 6.4 mm (1/4") ID. The ME6PXN Precision Inline Flowsensor, 6.4 mm (1/4") ID, has barbed (7.6 mm (5/16"), OD) rigid Ultem tubing ends which mate easily with flexible laboratory tubing. It can be calibrated for up to four fluid, temperature, flow rate combinations. Supplied with a 1.85 m cable, CC16 or CP16 16-pin connector. Please consult your nearest ADInstruments Office or representative for the most suitable probe for your application.

ME10PXN

Precision XN Inline Flowsensor, 9.5 mm (3/8") ID. The ME10PXN Precision Inline Flowsensor, 9.5 mm (3/8") ID, has barbed (11.1 mm (7/16"), OD) rigid Ultem tubing ends which mate easily with flexible laboratory tubing. It can be calibrated for up to four fluid, temperature, flow rate combinations. Supplied with a 1.85 m cable, CC16 or CP16 16-pin connector. Please consult your nearest ADInstruments Office or representative for the most suitable probe for your application.

ME13PXN

Precision XN Inline Flowsensor, 12.7 mm (1/2") ID. The ME13PXN Precision Inline Flowprobe, 12.7 mm (1/2") ID, has barbed (14.7 mm (0.58"), OD) rigid Ultem tubing ends which mate easily with flexible laboratory tubing. It can be calibrated for up to four fluid, temperature, flow rate combinations. Supplied with a 1.85 m cable, CC16 or CP16 16-pin connector. Please consult your nearest ADInstruments Office or representative for the most suitable probe for your application.

ME16PXN

Precision XN Inline Flowsensor 15.9 mm (5/8") ID. The ME16PXN Precision Inline Flowsensor, 15.9 mm (5/8") ID, has barbed (18.3 mm (0.72"), OD) rigid Ultem tubing ends which mate easily with flexible laboratory tubing. It can be calibrated for up to four fluid, temperature, flow rate combinations. Supplied with a 1.85 m cable, CC16 or CP16 16-pin connector. Please consult your nearest ADInstruments Office or representative for the most suitable probe for your application.

ME19PXN

Precision XN Inline Flowsensor, 19.1 mm (3/4") ID. The ME19PXN Precision Inline Flowsensor, 19.1 mm (3/4") ID, has barbed (21.9 mm (0.86"), OD) rigid Ultem tubing ends which mate easily with flexible laboratory tubing. It can be calibrated for up to four fluid, temperature, flow rate combinations. Supplied with a 1.85 m cable, CC16 or CP16 16-pin connector. Please consult your nearest ADInstruments Office or representative for the most suitable probe for your application.

ME25PXN

Precision XN Inline Flowsensor, 25.4 mm (1") ID. The ME25PXN Precision Inline Flowsensor, 25.4 mm (1") ID, has barbed (29 mm (1.14"), OD) rigid Ultem tubing ends which mate easily with flexible laboratory tubing. It can be calibrated for up to four fluid, temperature, flow rate combinations. Supplied with a 1.85 m cable, CC16 or CP16 16-pin connector. Please consult your nearest ADInstruments Office or representative for the most suitable probe for your application.

Артикул

PXN Series